Parcoords
customdata: 'data array' #(1)!
dimensions:
constraintrange: 'array' #(2)!
label: 'string' #(3)!
multiselect: 'boolean' #(4)!
name: 'string' #(5)!
range: 'array' #(6)!
templateitemname: 'string' #(7)!
tickformat: 'string' #(8)!
ticktext: 'data array' #(9)!
tickvals: 'data array' #(10)!
values: 'data array' #(11)!
visible: 'boolean' #(12)!
domain:
column: 'integer greater than or equal to 0' #(13)!
row: 'integer greater than or equal to 0' #(14)!
x: 'array' #(15)!
y: 'array' #(16)!
ids: 'data array' #(17)!
labelangle: 'angle' #(18)!
labelfont:
color: color
family: 'string' #(19)!
size: number greater than or equal to 1
labelside: 'enumerated , one of ( "top" | "bottom" )' #(20)!
legendgrouptitle:
font:
color: color
family: 'string' #(21)!
size: number greater than or equal to 1
text: 'string' #(22)!
legendrank: 'number' #(23)!
legendwidth: 'number greater than or equal to 0' #(24)!
line:
autocolorscale: 'boolean' #(25)!
cauto: 'boolean' #(26)!
cmax: 'number' #(27)!
cmid: 'number' #(28)!
cmin: 'number' #(29)!
color: 'color or array of colors' #(30)!
coloraxis: 'subplotid' #(31)!
colorbar:
bgcolor: 'color' #(32)!
bordercolor: 'color' #(33)!
borderwidth: 'number greater than or equal to 0' #(34)!
dtick: 'number or categorical coordinate string' #(35)!
exponentformat: 'enumerated , one of ( "none" | "e" | "e" | "power" | "si" | "b"
)' #(36)!
len: 'number greater than or equal to 0' #(37)!
lenmode: 'enumerated , one of ( "fraction" | "pixels" )' #(38)!
minexponent: 'number greater than or equal to 0' #(39)!
nticks: 'integer greater than or equal to 0' #(40)!
orientation: 'enumerated , one of ( "h" | "v" )' #(41)!
outlinecolor: 'color' #(42)!
outlinewidth: 'number greater than or equal to 0' #(43)!
separatethousands: 'boolean' #(44)!
showexponent: 'enumerated , one of ( "all" | "first" | "last" | "none" )' #(45)!
showticklabels: 'boolean' #(46)!
showtickprefix: 'enumerated , one of ( "all" | "first" | "last" | "none" )' #(47)!
showticksuffix: 'enumerated , one of ( "all" | "first" | "last" | "none" )' #(48)!
thickness: 'number greater than or equal to 0' #(49)!
thicknessmode: 'enumerated , one of ( "fraction" | "pixels" )' #(50)!
tick0: 'number or categorical coordinate string' #(51)!
tickangle: 'angle' #(52)!
tickcolor: 'color' #(53)!
tickfont:
color: color
family: 'string' #(54)!
size: number greater than or equal to 1
tickformat: 'string' #(55)!
tickformatstops:
dtickrange: 'array' #(56)!
enabled: 'boolean' #(57)!
name: 'string' #(58)!
templateitemname: 'string' #(59)!
value: 'string' #(60)!
ticklabeloverflow: 'enumerated , one of ( "allow" | "hide past div" | "hide past
domain" )' #(61)!
ticklabelposition: 'enumerated , one of ( "outside" | "inside" | "outside top"
| "inside top" | "outside left" | "inside left" | "outside right" | "inside
right" | "outside bottom" | "inside bottom" )' #(62)!
ticklabelstep: 'integer greater than or equal to 1' #(63)!
ticklen: 'number greater than or equal to 0' #(64)!
tickmode: 'enumerated , one of ( "auto" | "linear" | "array" )' #(65)!
tickprefix: 'string' #(66)!
ticks: 'enumerated , one of ( "outside" | "inside" | "" )' #(67)!
ticksuffix: 'string' #(68)!
ticktext: 'data array' #(69)!
tickvals: 'data array' #(70)!
tickwidth: 'number greater than or equal to 0' #(71)!
title:
font:
color: color
family: 'string' #(72)!
size: number greater than or equal to 1
side: 'enumerated , one of ( "right" | "top" | "bottom" )' #(73)!
text: 'string' #(74)!
x: 'number between or equal to -2 and 3' #(75)!
xanchor: 'enumerated , one of ( "left" | "center" | "right" )' #(76)!
xpad: 'number greater than or equal to 0' #(77)!
y: 'number between or equal to -2 and 3' #(78)!
yanchor: 'enumerated , one of ( "top" | "middle" | "bottom" )' #(79)!
ypad: 'number greater than or equal to 0' #(80)!
colorscale: 'colorscale' #(81)!
reversescale: 'boolean' #(82)!
showscale: 'boolean' #(83)!
meta: 'number or categorical coordinate string' #(84)!
rangefont:
color: color
family: 'string' #(85)!
size: number greater than or equal to 1
tickfont:
color: color
family: 'string' #(86)!
size: number greater than or equal to 1
type: parcoords
uirevision: 'number or categorical coordinate string' #(87)!
unselected:
line:
color: 'color' #(88)!
opacity: 'number between or equal to 0 and 1' #(89)!
visible: 'enumerated , one of ( true | false | "legendonly" )' #(90)!
- Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements
- The domain range to which the filter on the dimension is constrained. Must be an array of
[fromValue, toValue]
withfromValue <= toValue
, or ifmultiselect
is not disabled, you may give an array of arrays, where each inner array is[fromValue, toValue]
. - The shown name of the dimension.
- Do we allow multiple selection ranges or just a single range?
- When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with
templateitemname
matching thisname
alongside your modifications (includingvisible: false
orenabled: false
to hide it). Has no effect outside of a template. - The domain range that represents the full, shown axis extent. Defaults to the
values
extent. Must be an array of[fromValue, toValue]
with finite numbers as elements. - Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with
templateitemname
matching itsname
, alongside your modifications (includingvisible: false
orenabled: false
to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it withvisible: true
. - Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"
- Sets the text displayed at the ticks position via
tickvals
. - Sets the values at which ticks on this axis appear.
- Dimension values.
values[n]
represents the value of then
th point in the dataset, therefore thevalues
vector for all dimensions must be the same (longer vectors will be truncated). Each value must be a finite number. - Shows the dimension when set to
true
(the default). Hides the dimension forfalse
. - If there is a layout grid, use the domain for this column in the grid for this parcoords trace .
- If there is a layout grid, use the domain for this row in the grid for this parcoords trace .
- Sets the horizontal domain of this parcoords trace (in plot fraction).
- Sets the vertical domain of this parcoords trace (in plot fraction).
- Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
- Sets the angle of the labels with respect to the horizontal. For example, a
tickangle
of -90 draws the labels vertically. Tilted labels with "labelangle" may be positioned better inside margins whenlabelposition
is set to "bottom". - HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- Specifies the location of the
label
. "top" positions labels above, next to the title "bottom" positions labels below the graph Tilted labels with "labelangle" may be positioned better inside margins whenlabelposition
is set to "bottom". - HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- Sets the title of the legend group.
- Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with
"reversed"
legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. - Sets the width (in px or fraction) of the legend for this trace.
- Determines whether the colorscale is a default palette (
autocolorscale: true
) or the palette determined byline.colorscale
. Has an effect only if inline.color
is set to a numerical array. In casecolorscale
is unspecified orautocolorscale
is true, the default palette will be chosen according to whether numbers in thecolor
array are all positive, all negative or mixed. - Determines whether or not the color domain is computed with respect to the input data (here in
line.color
) or the bounds set inline.cmin
andline.cmax
Has an effect only if inline.color
is set to a numerical array. Defaults tofalse
whenline.cmin
andline.cmax
are set by the user. - Sets the upper bound of the color domain. Has an effect only if in
line.color
is set to a numerical array. Value should have the same units as inline.color
and if set,line.cmin
must be set as well. - Sets the mid-point of the color domain by scaling
line.cmin
and/orline.cmax
to be equidistant to this point. Has an effect only if inline.color
is set to a numerical array. Value should have the same units as inline.color
. Has no effect whenline.cauto
isfalse
. - Sets the lower bound of the color domain. Has an effect only if in
line.color
is set to a numerical array. Value should have the same units as inline.color
and if set,line.cmax
must be set as well. - Sets the line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to
line.cmin
andline.cmax
if set. - Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under
layout.coloraxis
,layout.coloraxis2
, etc. Note that multiple color scales can be linked to the same color axis. - Sets the color of padded area.
- Sets the axis line color.
- Sets the width (in px) or the border enclosing this color bar.
- Sets the step in-between ticks on this axis. Use with
tick0
. Must be a positive number, or special strings available to "log" and "date" axes. If the axistype
is "log", then ticks are set every 10^(n"dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L", where f
is a positive number, gives ticks linearly spaced in value (but not position). For exampletick0
= 0.1,dtick
= "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5).tick0
is ignored for "D1" and "D2". If the axistype
is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, setdtick
to 86400000.0. "date" also has special values "M" gives ticks spaced by a number of months. n
must be a positive integer. To set ticks on the 15th of every third month, settick0
to "2000-01-15" anddtick
to "M3". To set ticks every 4 years, setdtick
to "M48" - Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B.
- Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.
- Determines whether this color bar's length (i.e. the measure in the color variation direction) is set in units of plot "fraction" or in "pixels. Use
len
to set the value. - Hide SI prefix for 10^n if |n| is below this number. This only has an effect when
tickformat
is "SI" or "B". - Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to
nticks
. Has an effect only iftickmode
is set to "auto". - Sets the orientation of the colorbar.
- Sets the axis line color.
- Sets the width (in px) of the axis line.
- If "true", even 4-digit integers are separated
- If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear.
- Determines whether or not the tick labels are drawn.
- If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden.
- Same as
showtickprefix
but for tick suffixes. - Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.
- Determines whether this color bar's thickness (i.e. the measure in the constant color direction) is set in units of plot "fraction" or in "pixels". Use
thickness
to set the value. - Sets the placement of the first tick on this axis. Use with
dtick
. If the axistype
is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set thetick0
to 2) except whendtick
="L" (see dtick
for more info). If the axistype
is "date", it should be a date string, like date data. If the axistype
is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears. - Sets the angle of the tick labels with respect to the horizontal. For example, a
tickangle
of -90 draws the tick labels vertically. - Sets the tick color.
- HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"
- range ["min", "max"], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null"
- Determines whether or not this stop is used. If
false
, this stop is ignored even within itsdtickrange
. - When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with
templateitemname
matching thisname
alongside your modifications (includingvisible: false
orenabled: false
to hide it). Has no effect outside of a template. - Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with
templateitemname
matching itsname
, alongside your modifications (includingvisible: false
orenabled: false
to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it withvisible: true
. - string - dtickformat for described zoom level, the same as "tickformat"
- Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is "hide past domain". In other cases the default is "hide past div".
- Determines where tick labels are drawn relative to the ticks. Left and right options are used when
orientation
is "h", top and bottom whenorientation
is "v". - Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled.
tick0
determines which labels are shown. Not implemented for axes withtype
"log" or "multicategory", or whentickmode
is "array". - Sets the tick length (in px).
- Sets the tick mode for this axis. If "auto", the number of ticks is set via
nticks
. If "linear", the placement of the ticks is determined by a starting positiontick0
and a tick stepdtick
("linear" is the default value iftick0
anddtick
are provided). If "array", the placement of the ticks is set viatickvals
and the tick text isticktext
. ("array" is the default value iftickvals
is provided). - Sets a tick label prefix.
- Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines.
- Sets a tick label suffix.
- Sets the text displayed at the ticks position via
tickvals
. Only has an effect iftickmode
is set to "array". Used withtickvals
. - Sets the values at which ticks on this axis appear. Only has an effect if
tickmode
is set to "array". Used withticktext
. - Sets the tick width (in px).
- HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- Determines the location of color bar's title with respect to the color bar. Defaults to "top" when
orientation
if "v" and defaults to "right" whenorientation
if "h". Note that the title's location used to be set by the now deprecatedtitleside
attribute. - Sets the title of the color bar. Note that before the existence of
title.text
, the title's contents used to be defined as thetitle
attribute itself. This behavior has been deprecated. - Sets the x position of the color bar (in plot fraction). Defaults to 1.02 when
orientation
is "v" and 0.5 whenorientation
is "h". - Sets this color bar's horizontal position anchor. This anchor binds the
x
position to the "left", "center" or "right" of the color bar. Defaults to "left" whenorientation
is "v" and "center" whenorientation
is "h". - Sets the amount of padding (in px) along the x direction.
- Sets the y position of the color bar (in plot fraction). Defaults to 0.5 when
orientation
is "v" and 1.02 whenorientation
is "h". - Sets this color bar's vertical position anchor This anchor binds the
y
position to the "top", "middle" or "bottom" of the color bar. Defaults to "middle" whenorientation
is "v" and "bottom" whenorientation
is "h". - Sets the amount of padding (in px) along the y direction.
- Sets the colorscale. Has an effect only if in
line.color
is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example,[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]
. To control the bounds of the colorscale in color space, useline.cmin
andline.cmax
. Alternatively,colorscale
may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd. - Reverses the color mapping if true. Has an effect only if in
line.color
is set to a numerical array. If true,line.cmin
will correspond to the last color in the array andline.cmax
will correspond to the first color. - Determines whether or not a colorbar is displayed for this trace. Has an effect only if in
line.color
is set to a numerical array. - Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace
name
, graph, axis and colorbartitle.text
, annotationtext
rangeselector
,updatemenues
andsliders
label
text all supportmeta
. To access the tracemeta
values in an attribute in the same trace, simply use%{meta[i]}
wherei
is the index or key of themeta
item in question. To access tracemeta
in layout attributes, use%{data[n[.meta[i]}
wherei
is the index or key of themeta
andn
is the trace index. - HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".
- Controls persistence of some user-driven changes to the trace:
constraintrange
inparcoords
traces, as well as someeditable: true
modifications such asname
andcolorbar.title
. Defaults tolayout.uirevision
. Note that other user-driven trace attribute changes are controlled bylayout
attributes:trace.visible
is controlled bylayout.legend.uirevision
,selectedpoints
is controlled bylayout.selectionrevision
, andcolorbar.(x|y)
(accessible withconfig: {editable: true}
) is controlled bylayout.editrevision
. Trace changes are tracked byuid
, which only falls back on trace index if nouid
is provided. So if your app can add/remove traces before the end of thedata
array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace auid
that stays with it as it moves. - Sets the base color of unselected lines. in connection with
unselected.line.opacity
. - Sets the opacity of unselected lines. The default "auto" decreases the opacity smoothly as the number of lines increases. Use "1" to achieve exact
unselected.line.color
. - Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).